dmesg - 2 x Intel Xeon E5-2620 v4 - bochsdrmfb - Xen HVM domU
Linux version 4.9.0-3-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.30-2+deb9u2 (2017-06-26)
Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-3-amd64 root=/dev/xvda1 ro quiet
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000efffffff] usable
BIOS-e820: [mem 0x00000000fc000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000010f7fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Xen HVM domU, BIOS 4.7.2-2.3 05/11/2017
Hypervisor detected: Xen
Xen version 4.7.
Xen Platform PCI: I/O protocol version 1
Netfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated NICs.
Blkfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated disks.
You might have to change the root device
from /dev/hd[a-d] to /dev/xvd[a-d]
in your root= kernel command line option
HVMOP_pagetable_dying not supported
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x10f800 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-combining
C0000-FFFFF write-back
MTRR variable ranges enabled:
0 base 0000F0000000 mask 3FFFF0000000 uncachable
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0xf0000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fb630-0x000fb63f] mapped at [ffff9bc6c00fb630]
Base memory trampoline at [ffff9bc6c0098000] 98000 size 24576
Using GB pages for direct mapping
BRK [0xb3b2f000, 0xb3b2ffff] PGTABLE
BRK [0xb3b30000, 0xb3b30fff] PGTABLE
BRK [0xb3b31000, 0xb3b31fff] PGTABLE
BRK [0xb3b32000, 0xb3b32fff] PGTABLE
BRK [0xb3b33000, 0xb3b33fff] PGTABLE
BRK [0xb3b34000, 0xb3b34fff] PGTABLE
RAMDISK: [mem 0x35d9d000-0x36ec5fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000EA020 000024 (v02 Xen )
ACPI: XSDT 0x00000000FC00CF40 000044 (v01 Xen HVM 00000000 HVML 00000000)
ACPI: FACP 0x00000000FC00CC80 0000F4 (v04 Xen HVM 00000000 HVML 00000000)
ACPI: DSDT 0x00000000FC0042A0 008956 (v02 Xen HVM 00000000 INTL 20150619)
ACPI: FACS 0x00000000FC004260 000040
ACPI: FACS 0x00000000FC004260 000040
ACPI: APIC 0x00000000FC00CD80 0000D8 (v02 Xen HVM 00000000 HVML 00000000)
ACPI: HPET 0x00000000FC00CED0 000038 (v01 Xen HVM 00000000 HVML 00000000)
ACPI: WAET 0x00000000FC00CF10 000028 (v01 Xen HVM 00000000 HVML 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000010f7fffff]
NODE_DATA(0) allocated [mem 0x10f7fb000-0x10f7fffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000010f7fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x00000000efffffff]
node 0: [mem 0x0000000100000000-0x000000010f7fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000010f7fffff]
On node 0 totalpages: 1046429
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 15296 pages used for memmap
DMA32 zone: 978944 pages, LIFO batch:31
Normal zone: 992 pages used for memmap
Normal zone: 63488 pages, LIFO batch:15
ACPI: PM-Timer IO Port: 0xb008
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ5 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
ACPI: IRQ11 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 15 CPUs, 11 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xffffffff]
e820: [mem 0xf0000000-0xfbffffff] available for PCI devices
Booting paravirtualized kernel on Xen HVM
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:15 nr_node_ids:1
percpu: Embedded 35 pages/cpu @ffff9bc7caa00000 s103512 r8192 d31656 u262144
pcpu-alloc: s103512 r8192 d31656 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 --
xen: PV spinlocks enabled
PV qspinlock hash table entries: 256 (order: 0, 4096 bytes)
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1030056
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-3-amd64 root=/dev/xvda1 ro quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 4018792K/4185716K available (6187K kernel code, 1137K rwdata, 2856K rodata, 1392K init, 688K bss, 166924K reserved, 0K cma-reserved)
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=15.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=15
NR_IRQS:33024 nr_irqs:952 16
xen:events: Using FIFO-based ABI
xen:events: Xen HVM callback vector for event delivery is enabled
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 30580167144 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2100.160 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4200.11 BogoMIPS (lpj=8400224)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160831
ACPI: 1 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: disabled by default; enable with sysctl kernel.yama.*
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 2 MCE banks
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 24K (ffffffffa627a000 - ffffffffa6280000)
ftrace: allocating 25178 entries in 99 pages
smpboot: Max logical packages: 4
x2apic: IRQ remapping doesn't support X2APIC mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
Xen: using vcpuop timer interface
installing Xen timer for CPU 0
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2620 v4 @ 2.10GHz (family: 0x6, model: 0x4f, stepping: 0x1)
cpu 0 spinlock event irq 53
Performance Events: unsupported p6 CPU model 79 no PMU driver, software events only.
NMI watchdog: disabled (cpu0): hardware events not enabled
NMI watchdog: Shutting down hard lockup detector on all cpus
installing Xen timer for CPU 1
x86: Booting SMP configuration:
.... node #0, CPUs: #1
cpu 1 spinlock event irq 59
installing Xen timer for CPU 2
#2
cpu 2 spinlock event irq 65
installing Xen timer for CPU 3
#3
cpu 3 spinlock event irq 71
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (16811.81 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: Using configuration type 1 for base access
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
xen: --> pirq=16 -> irq=9 (gsi=9)
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
random: fast init done
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
acpiphp: Slot [0] registered
acpiphp: Slot [3] registered
acpiphp: Slot [4] registered
acpiphp: Slot [5] registered
acpiphp: Slot [6] registered
acpiphp: Slot [7] registered
acpiphp: Slot [8] registered
acpiphp: Slot [9] registered
acpiphp: Slot [10] registered
acpiphp: Slot [11] registered
acpiphp: Slot [12] registered
acpiphp: Slot [13] registered
acpiphp: Slot [14] registered
acpiphp: Slot [15] registered
acpiphp: Slot [16] registered
acpiphp: Slot [17] registered
acpiphp: Slot [18] registered
acpiphp: Slot [19] registered
acpiphp: Slot [20] registered
acpiphp: Slot [21] registered
acpiphp: Slot [22] registered
acpiphp: Slot [23] registered
acpiphp: Slot [24] registered
acpiphp: Slot [25] registered
acpiphp: Slot [26] registered
acpiphp: Slot [27] registered
acpiphp: Slot [28] registered
acpiphp: Slot [29] registered
acpiphp: Slot [30] registered
acpiphp: Slot [31] registered
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfbffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
pci 0000:00:01.1: reg 0x20: [io 0xc520-0xc52f]
pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:01.2: [8086:7020] type 00 class 0x0c0300
pci 0000:00:01.2: reg 0x20: [io 0xc500-0xc51f]
pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf1000000-0xf17fffff pref]
pci 0000:00:03.0: [5853:0001] type 00 class 0x010000
pci 0000:00:03.0: reg 0x10: [io 0xc000-0xc0ff]
pci 0000:00:03.0: reg 0x14: [mem 0xf0000000-0xf0ffffff pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11)
ACPI: Enabled 2 GPEs in block 00 to 0F
xen:balloon: Initialising balloon driver
xen_balloon: Initialising balloon driver
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0x10f800000-0x10fffffff]
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 62.500000 MHz counter
clocksource: Switched to clocksource xen
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x08a0-0x08a3] has been reserved
system 00:01: [io 0x0cc0-0x0ccf] has been reserved
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
xen: --> pirq=17 -> irq=8 (gsi=8)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
xen: --> pirq=18 -> irq=12 (gsi=12)
pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
xen: --> pirq=19 -> irq=1 (gsi=1)
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
xen: --> pirq=20 -> irq=6 (gsi=6)
pnp 00:05: [dma 2]
pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
xen: --> pirq=21 -> irq=4 (gsi=4)
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
xen: --> pirq=22 -> irq=7 (gsi=7)
pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:08: [io 0x10c0-0x1141] has been reserved
system 00:08: [io 0xb044-0xb047] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xf0000000-0xfbffffff window]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: PIIX3: Enabling Passive Release
pci 0000:00:01.0: Activating ISA DMA hang workarounds
xen: --> pirq=23 -> irq=23 (gsi=23)
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 17572K (ffff9bc6f5d9d000 - ffff9bc6f6ec6000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xec000000-0xf0000000] (64MB) mapped at [ffff9bc7ac000000-ffff9bc7afffffff]
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1501953193.903:1): initialized
workingset: timestamp_bits=40 max_order=20 bucket_order=0
zbud: loaded
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 79
GHES: HEST is not enabled!
xen: --> pirq=24 -> irq=30 (gsi=30)
xen:grant_table: Grant tables using version 1 layout
Grant table initialized
00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one day, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
microcode: sig=0x406f1, pf=0x1, revision=0xb00001d
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
zswap: loaded using pool lzo/zbud
ima: No TPM chip found, activating TPM-bypass!
xenbus_probe_frontend: Device with no driver: device/vbd/768
xenbus_probe_frontend: Device with no driver: device/vbd/5696
xenbus_probe_frontend: Device with no driver: device/vif/0
xenbus_probe_frontend: Device with no driver: device/vif/1
xenbus_probe_frontend: Device with no driver: device/vif/2
xenbus_probe_frontend: Device with no driver: device/vif/3
rtc_cmos 00:02: setting system clock to 2017-08-05 17:13:13 UTC (1501953193)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1392K (ffffffffa611e000 - ffffffffa627a000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1988K (ffff9bc77320f000 - ffff9bc773400000)
Freeing unused kernel memory: 1240K (ffff9bc7736ca000 - ffff9bc773800000)
x86/mm: Checked W+X mappings: passed, no W+X pages found.
piix4_smbus 0000:00:01.3: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
SCSI subsystem initialized
uhci_hcd 0000:00:01.2: UHCI Host Controller
uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:01.2: detected 2 ports
uhci_hcd 0000:00:01.2: irq 23, io base 0x0000c500
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 4.9.0-3-amd64 uhci_hcd
usb usb1: SerialNumber: 0000:00:01.2
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xen_netfront: Initialising Xen virtual ethernet driver
vbd vbd-5696: 19 xenbus_dev_probe on device/vbd/5696
libata version 3.00 loaded.
ata_piix 0000:00:01.1: version 2.13
FDC 0 is a S82078B
scsi host0: ata_piix
scsi host1: ata_piix
ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc520 irq 14
ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc528 irq 15
blkfront: xvda: barrier: enabled; persistent grants: disabled; indirect descriptors: disabled;
xvda: xvda1
ata2.01: ATAPI: QEMU DVD-ROM, 0.10.2, max UDMA/100
ata2.01: configured for MWDMA2
scsi 1:0:1:0: CD-ROM QEMU QEMU DVD-ROM 0.10 PQ: 0 ANSI: 5
sr 1:0:1:0: [sr0] scsi3-mmc drive: 4x/4x xa/form2 tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:1:0: Attached scsi CD-ROM sr0
EXT4-fs (xvda1): mounted filesystem with ordered data mode. Opts: (null)
random: crng init done
usb 1-2: new full-speed USB device number 2 using uhci_hcd
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected virtualization xen.
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Reached target Swap.
systemd[1]: Reached target Remote File Systems.
EXT4-fs (xvda1): re-mounted. Opts: errors=remount-ro
systemd-journald[201]: Received request to flush runtime journal from PID 1
usb 1-2: New USB device found, idVendor=0627, idProduct=0001
usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb 1-2: Product: QEMU USB Tablet
usb 1-2: Manufacturer: QEMU 0.10.2
usb 1-2: SerialNumber: 1
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input4
ACPI: Sleep Button [SLPF]
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
input: PC Speaker as /devices/platform/pcspkr/input/input5
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-16 Joules
sr 1:0:1:0: Attached scsi generic sg0 type 5
[drm] Initialized
[drm] Found bochs VGA, ID 0xb0c4.
[drm] Framebuffer size 8192 kB @ 0xf1000000, ioports @ 0x1ce.
[TTM] Zone kernel: Available graphics memory: 2020504 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
fbcon: bochsdrmfb (fb0) is primary device
ppdev: user-space parallel port driver
Console: switching to colour frame buffer device 128x48
bochs-drm 0000:00:02.0: fb0: bochsdrmfb frame buffer device
[drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 0
hidraw: raw HID events driver (C) Jiri Kosina
EDAC MC: Ver: 3.0.0
EDAC sbridge: Seeking for: PCI ID 8086:6fa0
EDAC sbridge: Ver: 1.1.1
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain dram
intel_rapl: DRAM domain energy unit 15300pj
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain dram
intel_rapl: DRAM domain energy unit 15300pj
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: QEMU 0.10.2 QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-2/1-2:1.0/0003:0627:0001.0001/input/input6
hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU 0.10.2 QEMU USB Tablet] on usb-0000:00:01.2-2/input0
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
tsc: Refined TSC clocksource calibration: 2099.995 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e452bf6fad, max_idle_ns: 440795268029 ns